CustomKraft MultiPressure System®

 View Brochure in PDF
View Flash Movie of Operation
Back to Equipment Menu

A self-service car wash manufacturer that prides itself on quality, CustomKraft's MultiPressure System® has been in service for over 20 years without a pump failure due to application.  Our equipment is ETL & CETL listed.

US Patent #43278660

MultiPressure System

The MultiPressure System® uses one pump per bay. This pump uses the same delivery hose for high-pressure, medium-pressure and low-pressure cycles. Lower pressure cycles are applied at a pre-set, field adjustable pressure, while high-pressure cycles remain unchanged. Chemicals are selected using color-coded solenoid valves with lighted NEMA rated connectors. The chemicals are pressurized with the bay pump; a delay timer activates a secondary by-pass valve, allowing
discharge back to the intake of the pump. By controlling the by-pass flow rate, cycle delivery
pressure is regulated.

Standard cycles include:

  • Stop
  • Tire Cleaner
  • Wheel & Chrome
  • Pre-Soak
  • Soap
  • Foam Brush
  • Tri-Color Gun
  • Gloss Wax
  • Bug-Off
  • Rinse
  • Rubber Protect
  • Spot-free Rinse

Custom cycles available upon request.

CustomKraft MultiPressure System® Advantages

  • Uses the same pump for the high-pressure, medium-pressure and low-pressure.
  • Single delivery hose per bay reduces installation time and eases maintenance.
  • Weep Mizer freeze protection used on single delivery hose, without overhead check valves.
  • Changeover time reduced for low-pressure applications and is the same no matter which
    chemical is being dispensed.
  • Eliminates many components including: in-bay check valves, low-pressure delivery pumps
    and poly hoses.
  • Increases the reliability of the system by reducing the number of components.
  • Low-pressure cycles may be delivered at higher application pressures.
  • CustomKraft MultiPressure System® has been in service for over 20 years without a pump
    failure due to application.
  • CustomKraft’s equipment is ETL & CETL listed.


When a customer selects a low-pressure cycle, the MultiPressure System® runs at high-pressure
until the chemical reaches the bay. This permits faster delivery to the customer and higher customer satisfaction. When the product reaches the spray tip, the system switches to low-pressure
automatically. The low-pressure chemical is then applied at the selected pressures. The unit
initiates at high-pressure for each new selection.

CustomKraft Industries 4611 W. Bethany North Little Rock, Arkansas 72117
501-955-5959 800-869-1448 Fax: 501-945-3408